ZC420

Configure

Description

The Zero Compromise Optic ZC420 combines superior optical performance with unsurpassed mechanical precision in the best ultra -short design ever developed.

This rifle scope combines supreme precision, brilliant optics and ruggedness in a compact package that rivals much larger scopes. Measuring 325 mm (12.8 inches) long and weighing only 1036g, this small scope is ideal for any application where size and maximum performance are paramount.

The low magnification provides a wide field of view for your close-range engagements, while the mechanical system allows for 35 mils of elevation adjustment. Never before has so much performance been combined in such an elegant and compact riflescope.

Unsurpassed optical performance.

Our optical engineers have set the next standard for clarity, light transmission and resolution in a compact package. At this magnification range and lens size, such performance has never been seen before. Color reproduction allows for the best possible imaging, total light transmission is 92% with first class resolution.

Reticle

MPCT3X

The MPCT3X features an open concept design above the primary horizontal crosshair and a minimally sized dot-style holdover tree

below. This design features 0.2 Mil diameter open circles at all whole Mil values making holds easier to identify rapidly and while

using the scope at a reduced magnification setting. The tree portion of the reticle utilizes dots arranged in a grid pattern with 0.2

Mil spacing thus allowing greater precision with holding for elevation as well as wind.

The upper half of the field of view has the vertical crosshair extending up to 4.0 Mils. This maintains an open field of view in the

upper half of the reticle while providing enhanced hold-under capability or measurement for calling bullet trace. In practical application

with multiple targets at widely varying distances, shooters can now dial their elevation turret for an intermediate range

target and then hold under for the closer targets and hold over for the more distant targets.

Spotting for other shooters is also enhanced with less clutter above the primary horizontal crosshair.

The primary horizontal crosshair features 0.2 Mil references along the bottom edge that provide a visual distinction between the

0.2, 0.4, 0.6, and 0.8 Mil marks making those hold points rapidly identified. We’ve also included a single tick mark along the top

edge of the horizontal at every 0.5 Mil location for those shooters preferring to have that value available.

Additional points:

1. The tree is only as large as absolutely necessary to hold for a 308 Winchester shooting the 175 SMK at 2650 ft/sec. under

standard

atmospheric conditions with a 20-mph full value wind. All other modern cartridges under vastly different atmospheric

conditions should easily remain within this grid.

2. Reference numbers for wind holds are included at 3R and 3L locations indicating a wind hold of that amount. This highly

negates counting of dots and circles to locate the correct hold point under stress or time limits.

3. The even elevation numbers are located on both left and right sides of the tree making counting much easier. Numbers are

reduced in size along the primary vertical down the tree for enhance visibility and only at the 4, 8, 12, and 14 Mil locations to reduce clutter in the FOV.

4. The MPCT3X is the ultimate reticle for speed and highest precision at the same time! It is fully functional across the entire

magnification range and features design aspects never before implemented into a single reticle.

ZC420

Related products